Tank bottom diaphragm valve is equipped with sampling valve

The tank bottom valve usually needs to be welded at the bottom of the container to achieve the best functions of discharge, sampling, cleaning and disinfection. According to the different direction and position of the downstream pipeline, Burkert's tank bottom valve can flexibly select the left and right water outlet direction or multi-directional at the same time. The tank bottom valve body is machined from a whole piece of material, and can also be equipped with CIP / SIP interface and sampling port; The water outlet section can be welded or clamped. If necessary, such valves can also be welded on the side wall of the container, and the radian of the valve body can be adjusted according to the customer's container radius to match it perfectly. In the actuator part, full consideration shall be given to the flexibility of operation and the use when replacing the diaphragm.